I have some quick and easy sewing to share this week: a top and a skirt, though not to be worn together!
Another top from the #fabriclove giveaway fabric
So this is what happened.
When I received this rayon challis from the Elliott Berman #fabriclove contest, I wanted to make my already-altered McCalls 7194, but I couldn't find the pattern anywhere. Instead, I decided to work up another design. For the new top, instead of sewing the border on the bias, I decided to create a pattern that used as much of the border along the hem as possible. I measured exactly how much border I had (two yards) and modified the pattern to use every inch.
I started with Vogue 8913. After altering the pattern extensively, I found my copy of McCalls 7194. After a short dither, I decided to go with my original plan. I made this top, which I blogged about in my last post:
I've already worn this top quite a bit
The first top used half of the fabric. I still had 2 yards of border left (the fabric had a border along each selvedge)— it was enough for a second top. (It might seem confusing, but imagine splitting the fabric in half the long way, resulting in two pieces each measuring 2 yards by 30", and each piece with a 2-yard border. The original fabric was big enough for two sleeveless tops.)
I decided to make the Vogue 8913 pattern that I had altered and cast aside. I had purchased this pattern for the pants, so it was in the small size group of 4-14. For a top, I typically start with a size 18 and increase the width at the bust. Since I was starting with a 14, I had to add even more width, especially because this top is made for woven fabric.
I made numerous changes to achieve the design I wanted:
- Started with View A, size medium (the biggest size in the envelope).
- Joined up/bottom pieces on front to make a single pattern piece.
- Extended the hem horizontally to use as much of the border print as possible. This results in a hem that hangs with points at each side seam which is exactly what I wanted.
- Performed a 1-1/2" FBA, resulting in side seam darts.
- Performed a 1" broad back adjustment, resulting in back darts.
- Finished neck with self made bias tape.
- Finished armhole and hem with tiny hems.
When I was in NYC recently, I picked up a striped mesh/scuba knit fabric. I decided to make it into a skirt, using the same pattern I drafted to make a laser cut faux leather skirt more than two years ago. I really enjoy wearing that skirt, which is a simple a-line shape cut on the bias. In fact, I've had multiple offers to buy that garment right off my body.
As before, I cut the striped scuba/mesh knit on the bias. This skirt is dead simple to sew with two side seams, and a waistband casing made from a contrasting jersey print. Easy peasy.
My birthday was a couple weeks ago, but I had just returned from NYC, and DD1 had just returned from Mexico, so we decided to delay our celebration. Last weekend, we got together for dinner on a chilly San Francisco evening. As we walked to dinner, DD1 asked me how old I am. "58", I replied. "Wait... haven't you been 58 for several years now?"
LOL. Nope, definitely not!
Well, I DO! I always have.
I'm not sure when I'll have another garment to show so, have a great week! (or two or three...)
And please join me on Patti's Visible Monday!