Pages

Tuesday, March 16, 2010

A Good Ironing Board Cover is a Joy Forever


Year ago I inherited a nice, sturdy ironing board from my mother. It used to have one of those nasty Teflon covers, sold by so many sewing supply places. I hated that cover, and then, during the years I was not using the ironing board, it was exposed to moisture and something metallic rusted all over it. It was a nasty mess and I threw the cover and padding away. I was left with a very nekkid ironing board.

For the last six months or so that I've been sewing again, I just threw a piece of wool yardage over the ironing board and ironed away. It wasn't very satisfactory, not thick enough, and was always shifting around, but I made it work.

For the last couple weeks, I have been preparing for an upcoming sewing retreat, and I decided it was high time I made a proper cover. Years ago I had a wool army blanket intended for a ironing board pad, but it was lost to the mists of time. (An old wool blanket makes a perfect pad! So, check army surplus stores, flea markets, your basement... Just toss it in the washer/dryer and it's ready to cut out.)

To create the pattern, I took my ironing board, placed it on the floor, upside down, and traced the shape onto paper. I used that shape to cut out five layers of wool – three from the green wool twill I had been using as an ad hoc cover, and two layers from a piece of wool I fulled in the washer. The resulting yardage was very thick and very pink. (Yes, the original yardage was pink, but it seemed even more pink, if that were possible.)

I layered those five pieces together and pad stitched the heck out of them. Not so tightly as to compress the loft, but very thoroughly so they won't be shifting. I then loosely whip stitched around the entire piece. Voila, an ironing board pad that will hold heat, but not get too hot.

The pad, consisting of 5 layers of wool, pad-stitched together, with the raw edges loosely whipped. Yeah, it's ugly, but who cares? No one will ever see it. ;)


I cut the cover itself out of a fairly heavyweight piece of denim that was lying around. It's a light-colored denim, so I wouldn't be using it for clothing, as I prefer the darker blues. I laid the pattern on the denim, added 3" all around, and cut it out.

Next, I found a half yard of a pretty quilting fabric, mauve with a paisley design, and I cut 4 or 5 bias strips, 1.5" wide. I joined them together to make a continuous length. This would form the casing for the elastic. I folded it, wrong sides together, and stitched it around the cover with a 1/4" seam allowance. I zigzagged over the raw edge, but you could serge it as well. At the beginning and ending of the casing, I just turned the raw edges under twice, and topstitched (before attaching to the cover).

Attaching the bias binding, folded wrong sides together, to the cover. I then zigzagged the raw edges.


I threaded a narrow elastic through the casing, placed the cover on the ironing board, and pulled tight! I tied the ends of the elastic in a big bow and tucked them out of the way.

Wow, I LOVE my new ironing board cover! It has the perfect amount of loft and it's hecka sturdy, not to mention it's a very pretty shade of blue. I'm now ready for the sewing retreat!

4 comments:

  1. Thanks, Shams. Sounds good. I have a folder in my Bookmarks for ironing board cover and see a tutorial in there with a technique similar to yours. I would have never thought of the wool blanket and think your wool pad is a wonderful idea. It just so happens that I need a new ironing board cover myself and the old pad is ready for the trash. Hope you get batteries soon so we can see a photo?

    ReplyDelete
  2. Super! And this way you hopefully won't have to deal with the excess static that comes from polyester pads.

    ReplyDelete
  3. You have touched on something so often neglected. A great ironing board cover is a joy forever, or at least pretty close to it. Those old army blankets definitely make the best covers. I really need to do this.

    ReplyDelete
  4. Thanks, everyone. :) I just added photos!

    ReplyDelete