Pages

Wednesday, June 26, 2013

Geisha Faces Duster - Vogue 1356


I purchased this unique fabric locally. This two-toned (natural and marine blue) 100% linen features giant pointillist Geisha faces. It is woven using a coarse linen thread so the fabric is fairly heavy but has a nice drape - the texture reminds me a bit of burlap, but in linen.

After a trip through the washer and dryer on the hot setting, I decided to use the fabric to sew up Sandra Betzina's new duster pattern. This pattern has some interesting features:

  • Large front and back pieces, uninterrupted by seams, to showcase the large scale print.
  • The pattern says that the duster is "very loose fitting", but it is actually fairly fitted through the upper torso. There are two fish eye darts in the back, which I omitted. There is a small bust dart, and the side seams nip in above the waist. The duster is very loose fitting through the waist and hips.
  • The sleeves are two-piece sleeves, cut on the bias.
  • The front placket is also cut on the bias.
  • The optional patch pocket is actually two pockets each: the larger pocket sits on top and a bit lower than the smaller pocket, which peeps out.
  • The duster has an a-line shape. There are side slits, which I raised by about 3".

Fit and Sizing

I decided to use a size C, given my upper bust measurement. According to the pattern tissue, a size C is 41.5" (finished) at the bust. I measured the pattern tissue and this number didn't seem to be correct. I did a 1" FBA (adding 2" in width), and also cut out the side seams at a size D, but all the other seams and hems, I cut out as a size C.

The duster is unlined, but it has large facings. The facings extend to the armhole. Because of the FBA, the shape of the pattern near the front armhole was affected. I laid the front facing on top of the front, and transferred the new shape to the front facing.

Front facing pattern alteration
Back FACE-ing

Sleeves and Shoulders

I narrowed the shoulders by 1". I pinned the 2-pc sleeve pattern and tried it on and it was fairly close fitting through the upper arm. I measured the pattern, and the number did not agree with the printed number on the pattern for the finished upper arm. I then measured the armscye of the sleeve and the armhole - the armhole was more than 2" larger. I measured both the paper pattern and the garment.

This puzzled me. I was not sure if I had made a mistake somewhere, but I did widen the upper sleeve (and the armscye seam) by 1". I didn't increase it by more, because the sleeve is on the bias, and I thought that maybe this was intentional.

When I went to set in the sleeve, it was difficult, because the sleeve was smaller than the opening. I found myself wishing I had increased the sleeve by another inch. If you make this duster, make sure to double check the fit of the sleeve and the width of the upper sleeve.

I also could see that the sleeve was much too long. I shortened it by 1-5/8" but the finished sleeve was still too long by another inch or so, so I am wearing them folded back.

Interfacing

This pattern calls for the front and back facings to be interfaced. It suggests that you clean finish the outer edge of the facings by sewing the interfacing to the facing, right sides together and along the outer edge, then flip the interfacing to the back side. The raw outer edge is encased. If you have used a fusible interfacing, you would then fuse it to the back side of the facing.

Do any of you ever use this technique? I tried this technique many years ago (in the early-to-mid 80s, so it's been awhile) and did not like the result. I did use a lovely fusible interfacing from Fashion Sewing Supply, but I fused it in the normal manner.

Seam Finishes

Since the duster is unlined, the seams do need to be neatly finished. The instructions use several techniques. One is the technique I describe above, where the raw outer edge of the facings are encased inside the facing/interfacing seam. For the side seams, the raw edges are folded under and top-stitched. Seam binding is attached to the sleeve hems and then they are top-stitched. The raw edge of the hem is turned to the inside and then machine stitched. The two seams in the sleeves are not finished. I suspect this is because it would be hard to top-stitch both seams, and, as they are on the bias, they will not ravel.

For the most part, I did it differently, except for the side seams, which I did turn under and top-stitch. I used double fold bias binding (in two widths) throughout the garment, including the sleeves. I forgot how much binding you need for this approach! I ran out of bias binding twice and had to get more. (Thanks so much to Patti F who sent me the last package of bias binding I needed!)

Closure

The edges of the duster meet at center front. A placket with 5 snaps closes the duster. The pattern suggests that you can omit the placket (and wear it open), or replace the placket with a zipper. But something that did not make sense to me is that the placket and the placket lining, which are simple rectangles, are both cut on the bias. This strikes me as strange, since it would be very easy for it to distort with wear. I did go ahead and cut it out on the bias, but I am concerned that it will give me problems down the road. I made sure to fuse the placket with interfacing that was cut in a stable direction, and hopefully this will be sufficient.

But I do not understand why the placket is cut on the bias. It seems unnecessary and potentially problematic.

The snaps I used are size 24 snaps, from Snap Source, in Antique Brass and applied with a hammer, using the Snap Source tool. (I love Snap Source snaps!)

Pocket

The patch pockets on this duster are very cute. They are simple rectangles, but the smaller rectangle is first sewn on, then a larger pocket is sewn on top, and a little below, so the smaller pocket peeps out the top of the larger pocket.

I made a few changes. First, because of the nature of the print, I decided to put one set of pockets on the left side only. I wanted to fussy cut the outer pocket to feature the Geisha's face, so I enlarged both the under and upper pocket, by 2" in width and 2" in height. The pattern suggests that you fold in each bottom corner of the pocket and then fold in the two long edges of the corner, but this seems, to me, to be the way to achieve a lumpy finish.

Instead, I mitered the lower corners of the pockets, which results in a much cleaner finish. The pattern also suggests that you use Steam a Seam (or equivalent) to hold the seam allowances in place and also to place the pockets on the garment, but I did not find either step to be necessary.

Worn with my Trippens, which I call my "German Geisha" shoes!

Conclusion

I really like this duster! Partly because of the fun fabric, but I also like the design. Before I cut out the fabric, I considered changing the silhouette. I almost narrowed the a-line shaping to make it more column-shaped. I know that is a good look for me, but I decided to leave it as-is, only raising the side slits to give it more ease of movement. I like that it's semi fitted through the upper torso, nipped in at the waist, and loose and flowing below. It's fun to wear and, I think, a flattering look.

80 comments:

  1. Vogue should immediately get rid of their orange duster picture and put yours as the photo instead. This is fabulous! What a great matching of fabric to pattern. I love it. I want it...

    ReplyDelete
  2. Oh my goodness, I was thinking the same thing that Margy said!!! Your rendition would sell SO many more patterns. What a great piece of art you have created.

    ReplyDelete
  3. As Margy said, FABULOUS! I can't think of a better word to describe your creation. I'm in love with that fabric, too. Such as shame we seem to often have to second guess the stated finished measurements and, hopefully, the sleeve problem will get fixed with future printings. We can hope. You did a wonderful job on this duster! A+++++++

    ReplyDelete
  4. That is super fab, Shams! I agree with Margy, yours is much nicer than the envelope pic. I want it! : )

    ReplyDelete
  5. This is an example of creativity and talent=fabulous! I love the duster pattern, and your version is so interesting and intriguing. I am too short to wear the style, but will admire yours :-)

    ReplyDelete
  6. I am in agreement with both Margy and Rhonda - your rendition is absolutely stunning. And it certainly takes a lot of skill to showcase such fabric perfectly. Amazing!

    ReplyDelete
  7. lovely! Thank you for the reminder about altering the facing when you make an FBA in the pattern.

    ReplyDelete
  8. It's fabulous Sharon!! The large scale print was crying out to be used in a cool coat design like this. LOVE the Hong Kong seaming too.. so gorgeous looking from the inside view. And your shoes are just too perfect!!

    ReplyDelete
  9. Stunning! The fabric is so fun, love what you did with it. I agree with Margy, yours needs to be the cover shot.

    ReplyDelete
  10. It IS a flattering shape. You did a great job at figuring out how to take best advantage of that beautiful fabric. It's a little scary to hear how mismatched the sleeve and armscye were....

    ReplyDelete
  11. Wow! this is totally amazing.THanks for sharing so many details, it is an inspiring post.

    ReplyDelete
  12. Oh my goodness! Shams its fabulous. Such an interesting, unique, creative, fun and amazing coat. I have no idea how this designer fabric was used originally, but your rendition is perfect.

    ReplyDelete
  13. Superb marrying of this creative fabric to a well deserving pattern! Very flattering on the new-you...J

    ReplyDelete
  14. So great! And, you know, the first thing I thought when I saw the picture of the finished garment, was "SHE looks great!" The large print doesn't overpower, and the shape and artistry of the duster fit YOU! The shoes are absolutely to die for, too! Comfortable? Or is that just too much to ask?

    ReplyDelete
  15. As usual you are able to see the potential in a pattern design. This creation is truly wonderful and a great marriage of pattern and stunning fabric. Of course your attention to detail and sewing skills move it into a class of its own. Bravo and well done.

    ReplyDelete
  16. Great reviews and it will be valuable to anyone like me who is planning to make this pattern. Love the fabric, Margy is quite right: this version would def sell the pattern! It's so you...many thx ~Mary Beth

    ReplyDelete
  17. Isn't it wonderful when you find a unique piece of fabric and then have it tell you what it wants to be? I love your geisha duster. In my opinion, it looks much better than the photo on the pattern envelope. Your details are exquisite. As for your query about interfacing techniques, I tried the suggested method a few times, and agree with you. It's not worth the time and effort. I prefer piping to give a clean finished look to the insides of my unlined jackets. After it's sewn in, you need to stitch along the edges to prevent them from peeking out.

    ReplyDelete
  18. This is soooooo you! I love the combo of fabric and pattern and how you've made them work. I agree with the others that this is a piece of art. Great job S!

    ReplyDelete
  19. Gorgeous, gorgeous! What a fabulous fabric find and the perfect pattern for the fabric. Thanks for the heads up regarding your various issues with the pattern--it's always helpful when someone who has already blazed the trail provides those little nuggets of valuable information. Absolutely love the blue you used for your interior finishwork. Beautiful job Shams!

    ReplyDelete
  20. I am blown away by your talent and use of pattern with fabric! Since I struggle with FBA's, I wonder if you have a photo of the FBA you did on the pattern piece that you can share with us? I have no clue how one would add anything to this pattern top to accommodate a FBA. Thanks for inspiring me again, today.

    ReplyDelete
    Replies
    1. Jackie, I just did a "regular" FBA. Though I did do one tiny thing differently than I usually do. I just ignored the dart that was on the pattern. In other words, I pinned the front and back shoulder together on the pattern tissue, and put it on, while wearing a bra. I marked the location of my bust point. I just added an FBA, like I would do to any pattern. I didn't bother to move the existing dart, but I ignored it. It was a pretty small dart, or I wouldn't have done that.

      Delete
  21. AMAZING! Such creative use of a wonderful fabric. Beautiful work!

    ReplyDelete
  22. This fabric is so-o-o-o-o-o cool and so you! Love the 'duster' look and your signature 'twirl'! Know you'll be stopped on the street by women asking where you bought it.

    ReplyDelete
  23. It's fabulous; a great use of fabric and pattern. You look fabulous as well. This is very flattering on you, and yes Vogue should use your version; it's so much more interesting.

    ReplyDelete
  24. That is a gorgeous creation. Nothing further to add. :)

    ReplyDelete
  25. what a great fabric and what a fascinating analysis of the pattern and all your observations and adjustments. looks great on you and the shape is flattering and very cool.

    ReplyDelete
  26. If I had to point to one garment to represent your awesome talent, skills, and creativity, it would be this duster. I agree that your version outshines the Vogue one by light years. You look sensational. Congratulations on maintaining your weight loss, too. I am struggling with keeping off the weight I recently lost, and admire your discipline.

    ReplyDelete
    Replies
    1. I am sorry to hear about your struggles, Moushka. I do empathize. Sometimes we just need a "reboot" button to get back on track. I do hope you can find the motivation! I understand how terrifying it can be.

      Delete
  27. Gorgeous inside and out. I love the print and how you used it.

    In answer to your interfacing technique Q, yes, I do that. It's very fiddly to turn the interfacing over after sewing and line up the cut edges exactly. My epiphany was to cut the interfacing after sewing.

    Lay your cut fashion fabric facing pieces out on the interfacing. Stitch along the outer edges.
    Cut apart each interfacing/facing unit.
    Trim the facing outer edges, notching curves.
    Turn the interfacing to the inside carefully, trying not to stretch it. Fuse.
    Trim the rest of the interfacing.

    Now you have fused facings with enclosed edges and interfacing that goes right up to the edge (or where you want it).

    Do you want me to post some photos of the process?

    ReplyDelete
    Replies
    1. Thanks, Badmomgoodmom. I do understand what you are saying. That might make the process a bit less annoying. Thanks for sharing. :)

      Delete
  28. That is so cool. Love the boots!

    ReplyDelete
  29. sigh. . . sigh. . . sigh. . . . . what a fabulous garment! Brava!!!

    ReplyDelete
  30. Love this unusual fabric and your sewing skill is impeccable.

    ReplyDelete
  31. Is there another way to say I love, love, love this? Probably not. But I do. You look smashing.

    AND, the review with all the pointers is so thorough.

    Thanks!

    ReplyDelete
  32. Shams great coat! I just wanted to say that I use the clean finish method for interfaced facings where the interfacing and facing are stitched right sides together along the free edge (not caught by a seam), then turn and press. I have used this method with fusibles (fusing after turning) and non-fusibles. I really like the resulting neat, enclosed edge.

    ReplyDelete
    Replies
    1. Interesting, Betsy. It just seemed so fussy to me, but I haven't tried it in years.

      Delete
  33. Beyond fantastic. Truly a designer original and it looks terrific on you as well.

    ReplyDelete
  34. Love, love your art garment duster - such a great use of fantastic fabric! I must also add that you are one of my favorite bloggers. I check your site every day hoping for a new post.

    Karen

    ReplyDelete
  35. You look so runway fabulous! Distinctively beautiful jacket.

    ReplyDelete
  36. A wonderful garment in fabulous fabric. It looks amazing on you Shams - I hope you get lots of opportunity to enjoy wearing it.

    ReplyDelete
  37. You look amazing! You are such an inspiration.

    ReplyDelete
  38. AbSolute Perfection.

    That's all there is to say. steph

    ReplyDelete
  39. It looks fabulous! As others have said, the official photo is pretty uninspiring, but your coat is amazing! LOVE your choice of fabric. Your awesome style totally shines through on this one!

    ReplyDelete
  40. Wow, that looks so good with that fabric.

    ReplyDelete
  41. Perfect and perfect for your impeccable style.

    ReplyDelete
  42. What a fascinating coat! That fabric must look really wild before cutting - it almost looks like different pieces sewn together and it is just beautiful! I am so curious about the sleeves and how you managed to sew them in, being smaller than the armhole - since it was cut on the bias, were you able to stretch it in the sleeve cap? The finished silhoutte is so beautiful, it would encourage me to cut all my sleeves just like that! It IS a very flattering look.
    (and I love your bob haircut!!)

    ReplyDelete
    Replies
    1. The fabric was *very* interesting. It basically had 3 "columns" of images. The first column had the face upright, parallel to the selvedge. The middle column had the face sideways, perpendicular to the selvedge. I used the sideways face for the pocket. The rightmost column, was dark blue and the faces were smaller and quite dark. I definitely cut the pattern pieces out in a single layer, and very deliberately placed them.

      Delete
    2. Oh, and to answer your question: I just "made it work". Not my best armscye seams, but I was able to get them to look somewhat reasonable.

      Delete
  43. You are so fabulous! The coat and shoes are to die for.

    ReplyDelete
  44. Love that duster -- what great fabric that is. You are looking great--very cool!

    ReplyDelete
  45. Love it! I never would have looked at that pattern until you made it-better than the pattern envelope! But as Mary and a few others said- I am too short and the duster won't work for me. Do you think it would look good cut off shorter- maybe mid thigh? With narrow pants or leggings? Might have to move or eliminate the pockets then. Trying to find a way to make it work for us short people.

    ReplyDelete
    Replies
    1. Yes, I think the duster would be fine shortened. I almost shortened it but didn't want to cut my Geisha's face off. :)

      Delete
  46. This coat makes you officially the coolest dressed person I know. Wow, what an amazing combination of pattern and fabric. You have a terrific eye for design and look wonderful in it.

    ReplyDelete
  47. Amazing coat and definitely a gorgeous piece of art, enjoy wearing it, it looks fantastic on you!

    ReplyDelete
  48. Very nice work, and I'm also talking about both the coat and you -- you look fabulous!!

    ReplyDelete
  49. Wearable art - now doubt about it. It is beautifully made too.

    ReplyDelete
  50. Seriously- Vogue blahed-out using that orange floral. Yours shows all of the glorious possibilities of wearable art. It's gorgeous!!!

    ReplyDelete
  51. Shams, this post is a wonderful example of everything I love about your blog. You found a wonderful, unique piece of fabric and explained your thoughts about how to use it, how to fit it to a pattern, how to construct and finish it, and even how to accessorize the finished garment. Magnificent! My favorite part is the way the facings look back at you!

    ReplyDelete
  52. Great job, that looks so cool! Also great observations on the pattern discrepancies. Make sure to send this post to Vogue, care of Sandra Betzina. They'll want to check out those measurements.

    ReplyDelete
  53. I love your amazing duster. What great use of that fabric. I quite like the finishing facing technique you chose not to use - particularly for back neck facings in light garments, but I think your facing and finishing choice looks much better for this coat. I like reading about your thoughts and choices as you work through a pattern, it is a snippet of a sewing masterclass!
    I swore off Sandra Betzina patterns after several muslins taught me that the difference between her sloper and vogue's are all in the wrong alteration direction for me, but your soat is tempting me to make an exception - it looks terrific on you.

    ReplyDelete
  54. This is a fantastic garment! Perfect melding of fabric with garment design! Brilliant!

    ReplyDelete
  55. BTW, I've noticed that Sandra Betzina loves stripes on the bias because it makes diagonals. She uses it a lot on her garments and in her bias trim. So that may be why the closure piece is cut on the bias. I think she did it for visual interest on her original garment and the pattern maker at Vogue assumed it had to be cut on the bias. Hence an unstable piece in an area that shouldn't be. Yours puts the checks on the diagonal and it looks great. But the interfacing was smart.

    ReplyDelete
  56. What a statement piece! Super cool! (I love Snap Source snaps too!)

    ReplyDelete
  57. are you serious?!!?!! what an amazing piece!!

    ReplyDelete
  58. I second all the other comments! What a great looking garment---including the inside!

    ReplyDelete
  59. I'm so glad you live where such fabulous fabric was available, that you saw the potential for beauty in it while (surely) acknowledging the challenges of achieving that potential, that you had the technical abilities to create such a marvelous garment, and that you took the time and care to share your processes and techniques.

    What an inspiration you've shared!

    ReplyDelete
  60. I haven't read the other comments, but Shams, WOW, just wow. I have NEVER seen a fabric like this one! This is one fabulous garment you have made for yourself. It suits you to a T. I think that you would win ANY contest you entered with this one. And BTW, you should send it to Sandra Betzina and Vogue Patterns. Congratulations!!!

    ReplyDelete
  61. So creative and beautifully made!

    ReplyDelete
  62. So courageous of you to pick apart the faces and line them up to make this all work. Anyone else would have walked away. I do not use that older method of interfacing, so fiddly, unpredictable and the result is 4 layers at the edge. I like to keep my edges as thin as possible to prevent lumps and ridges on the outside. Sandra's patterns cause you to measure and think and measure and think and alter again...don't know why that is.

    ReplyDelete
  63. How devastatingly cool and, as others have commented, how totally unique. Kinda speechless, actually, but it's wonderful!!

    ReplyDelete
  64. Looking at the pattern model-photo, I would have never guess something so cool could come out of it. It takes a great seamstress to look beyond that print and see the potencial. Hats off to you. A Master piece.
    Oh, and you are looking prettier with every new post!

    ReplyDelete
  65. I agree with Moushka! I agree with everybody! I love every detail of this duster! It looks like you and you look fantastic. (And I love that little back FACE-ing surprise.)

    ReplyDelete
  66. Your Duster is totally amazing!

    ReplyDelete
  67. I am a little late to the party having just discovered your blog...but that duster - wow...oh wow...oh wow. I want to echo what so many others have said - it is art. Show-stopping art. Love. It.

    ReplyDelete
  68. I'm still working on a muslin of this duster, but I'm making it as a summer robe. I'll be using a blue/white gingham seersucker but haven't yet decided on a facing fabric. I've made quite a few tweaks on the muslin so far, and I really don't like the neckline as it is too high on me. The sizing is also weird, as I made an F according to the measurements but really need a F/G. I'll be putting in a zipper in the front so no worries about the crazy bias flap. Notice the pattern envelope sample, it is way too big for the model! the shoulders are about 1/2 inch too long. I know Simplicity does this sort of thing all the time but I expect better of Vogue.

    ReplyDelete