The event is to be held at Cañada College in Redwood City, on Saturday, April 16th, at 7:30pm. Space is limited so, if you would like to come, please RSVP to chaney@smccd.edu.
I believe there will be some light refreshments. And it's always fun to meet other sewers! (I promise, it will be fun!)
I have to tell you, this will be my last speaking engagement for the foreseeable future. It takes so much time to prep for these things.
I hope to see you there!
Oh, I almost forgot! The folks at Cañada College asked me to do an interview. Check it out!
After returning from a recent getaway, I wanted to sew something quick.
Of course, sometimes "quick" really isn't quick.
I had a novelty knit that I acquired when my friend Sue was de-stashing last year. I wanted to make it up and, after much thought, I decided to use a pattern I had purchased some time ago, the Paprika sweater/dress by Jasper Patterns.
I bought this pattern back when Dilliander made a couple of nice versions.
I loved the collar!
I had even printed the pattern and instructions out.
But I still had to tape together the 44-page print out. (Maybe one of these days I'll try going to the copy shop...)
I traced off a size 9. (The pattern goes from size 1 to 10.) The 9 is drafted for a 46.5" bust with a finished dimension of 47.5". The 9 is drafted for a 39" waist with a finished dimension of 46".
The resulting top was far too big! My only alteration was to shave off fullness at the hip. The reported finished width was off, as the finished waist on mine was 48", as you can see in the following pic, and the bust was even larger (the bust is not laid out completely flat):
It seemed particularly loose through the back.
I could have salvaged the top. There are no side seams, but there are front and back princess seams, which allow fine tuning the fit, but I decided against it. I didn't like how the collar lay, at least in this knit.
If I do make this again, I'll trace off a smaller size and will be more careful when choosing the fabric.
Over two years ago Gayle Ortiz gave me a wonderful tip. A tip that I had passed on to others but hadn't tried myself until recently!
I'm not sure if its her original idea, but it's a good one!
She went to the party store and bought a wedding aisle runner. It comes on a roll. It's similar to non-woven interfacing or Swedish tracing paper. It's nice and wide at 36".
And it's very cheap!
A roll costs about $20 and comes with 100 feet, or over 33 yards. Thatsalotta tracings!
For comparison, Swedish tracing paper is 29" wide and about 10 yards for $16, at least that's today's price on Amazon.
I haven't used Swedish tracing paper in years, so I can't comment on precisely how they compare, but the aisle runner works very well! I used it to trace off the Paprika Jasper and it was very easy to see through. It's much sturdier than tissue paper. You can sew through it—it's designed to handle a bride's stilettos, after all. ;)
It arrived in a box that was 5 feet long though, inside, it was in a 3-foot long box that was labeled as coming from Oriental Trading. I didn't check the price on the Oriental Trading website, but that might be a cheaper way to obtain it. Or head to your local party store!
I wanted to share something Kathy made for our trip to Whistler.
She's a knitter and she decided to make some thrummed mittens. I had heard of thrummed mittens but was curious to see how hers would knit up and how they would work, in practice. I had never seen real live thrummed mittens, but then there's not much need for such heavy duty hand coverings in the San Francisco Bay Area.
If you aren't familiar with this term, thrumming is a technique where tiny tufts of wool roving are knitted into a garment.
The fluffy part of the roving is on the inside and, with wear, it felts and creates an even warmer layer.
Pretty clever, but the inside looks freakishly weird.
I'm sorry to report that Satin Moon Fabrics, on Clement Street in San Francisco, is closing at the end of 2016. This was a special store, run by two truly unique sisters. I always enjoyed visiting.
I am half way finished with another garment—this one is slated for my trip to Paris.
If all goes well.
I leave you with a cartoon that came across my Facebook page. It amused me.
I tried to locate the name of the artist to link to her site and give her credit, but was unable to figure it out. If you know, please leave a comment!
I have been auditioning patterns for my Paris wardrobe. The Minoru was my first pattern audition, and I loved it. Now I'm auditioning a jacket pattern by Palmer Pletsch, McCalls 7024, which is now out of print. (It's a shame, as this is really an excellent pattern!)
This pattern features front and back princess seams, button front, curved front hems, two-piece sleeves, hem slits in the sleeves, no side seams (it uses side panels), French darts, back waist gathering, lining, and view B has a great, pleated stand-up collar. That's what really drew me in - that great collar.
I made a size 18, which is my usual size. But I will note that, despite the pattern being labelled as "semi fitted" that it has more room than I expected. I lowered and increased the bust dart, but only in the vertical direction, as I didn't need additional width in the bust. This is highly unusual for me.
Other alterations and modifications: I shortened the sleeves by about 5/8" and reduced width at the front hip. I narrowed the shoulder by 5/8". As my fabric was a thick wool, I eliminated the channel for gathering the back waist. I also eliminated the cording in the collar. The pattern calls for in-seam pockets and/or a decorative pocket flap, which I replaced with slanted welt pockets. I also added a hidden inside pocket.
I had trouble deciding which fabric to use. I pulled at least five fabrics, each time thinking I had made a decision, only to change my mind. In the end, I chose a wool fabric that I bought at the now-closed Santa Fe Fabrics in New Mexico. The base fabric is a lightweight knit that is embellished with lots of yarn and thread. I prefer the reverse side of the fabric. You can see the front of the fabric on the inside pocket:
The inside pocket uses the "right side" of the fabric. You can also see the polka dot lining I used in the sleeves, after running out of the black lining fabric I used in the body of the jacket.
I fused the front and back facings, and the sleeve facing, with
ProSheer Elegance Light from Pam Erny at Fashion Sewing Supply. It's a wonderful interfacing.
The pattern doesn't call for interfacing the collar, but I interlined it with fleece. The tucks are sewn into the collar, but only on the outside layer. I like the more substantial collar created by using the fleece.
It's a bit hard to see, but the sleeves feature hems with a slit
This is also a bit hard to see, but the welt pocket crosses the princess seam and is just below the French Dart
I was finishing the jacket on Presidents' Day, when I ran out of lining fabric. I decided to brave the stampede at Britex—at least those who show up for the big Presidents' Day Sales event. I purchased some beautiful Italian buttons and polka dot lining fabric, all for 30% off.
The buttons are large, so I closed the jacket with snaps, rather than make bound buttonholes (which are tricky in this uneven fabric) or giant standard buttonholes
While standing in the line to pay—it snaked up to the second floor—I met Lynora, a blog reader who was visiting SF from Washington D.C. I'm sorry that I didn't take a pic (I was busy spilling the contents of my bag down the stairs) but it was nice to meet you, Lenore!
I'm always glad to see Kirby, the Britex dog!
McCalls 7024
I love the fit of this jacket! Love love love. I may well end up using this pattern for a Paris garment.
I started this vest ages ago. I can't even remember when, exactly.
I purchased this beautiful Tisavel synthetic fur from Emma One Sock a year or two ago. (By the way, I recently learned that animal activists dislike the term "faux fur" because some manufacturers label rabbit, raccoon, or dog fur as "faux fur". They prefer the term "synthetic fur".)
At first, I was going to use this fabric for a cowl, but I decided I wanted to make a vest from it.
I used a pattern that I've used three times now, Burda 7852.
I wanted to use special fur techniques and I received very good advice from Rhonda Buss, who has industry experience sewing with real fur.
Most advice for sewing fur (either real or fake), is to choose a design with few seams. I actually don't believe that. I've observed many fur garments that feature intricate seaming. It's more work, of course, but it's quite doable. My pattern features princess seams and bust darts, so it had plenty of seams.
The first difference comes when cutting out the fur. You cut it from the wrong side with a blade of some sort. You want to avoid cutting the hairs. I used a box cutter.
Once I finished cutting out the pieces, I took them outside and shook them vigorously. This removed most of the loose fibers. After this step, I did not have problems with excessive fibers when sewing.
When sewing real fur, you cut the pattern pieces with no seam allowance, or a scant seam allowance. That's what I did, though Rhonda felt that this was overkill for a fake fur garment. But I'm stubborn that way. :)
The seams are all abutted, and stitched with a closely spaced buttonhole sort of stitch. By hand. My technique was similar to this:
Yes, I sewed the darts and all of those seams by hand. This definitely is a bit of overkill for a fake fur, but it creates thin, malleable, invisible seams. I loved the result.
I interlined the collar with fleece which makes for a cuddly soft collar. You can just make out some of the tiny little seams in this pic
I finished all of the raw edges with bias binding. I lined the vest, constructing the lining on the machine, then sewing it to the bias tape by hand.
Sewing the bias binding to the raw edge. You can also see the finished shoulder seam.
At first, I wanted to finish the vest with a double-ended zipper, but I could see that the fur was going to get caught in the zipper, so I used hooks.
Except that I am not a fan of the Dritz fur hooks offered at most sewing stores. They are pretty huge - too large for my shorter length fur, so I ordered some cute hooks on Etsy:
I sewed 7 sets of hooks to the front
I made a cutting error on the back lining. So I fixed it with a nice little patch:
I used side seam pockets. This is not my favorite style of pocket, but it's the most practical for a fur fabric.
Tisavel is a high-end synthetic fur. I haven't seen any on the Emma One Sock site lately, but I did see some on fabric.com.
The best feature of this vest is the collar. The soft fur is sooo luscious next to my neck! In fact, when I wear this vest, I can't stop petting myself. :)
Last week I met up with Debra S, a reader of my blog and a friend of one of my favorite bloggers. (If you haven't been reading Wendy's blog, West Zen Studio, you should!)
Anyway, Debra was in town for a few days and we scheduled lunch at my workplace in SF.
It was loads of fun!
I just loved the top that Debra was wearing. She made it after attending DOL in Taos, New Mexico. She told me that it was a Mizono pattern and I'm pretty sure that it's Vogue 1274.
She and a friend painted the design on the tweedy fabric, a silk linen blend she bought in Taos.
It had a wonderful drape, due to the silk/linen blend. To complement the hand painted bicycle motif, she found some gear shaped buttons on ebay.
Debra also made me a lovely gift! She pieced felted sweater knits to make wrist warmers to match my Minoru!
So thoughtful!
Thanks for these lovely warmers, Debra! I wore them today.
The same week I had another lunchtime blogger meet up! Erin, from Seamstress Erin, was visiting from up north. She used to live in San Francisco and had hosted several local gatherings for sewing bloggers. Jilly of JillyBe Joyful, and Laura of Lilacs and Lace, joined us for lunch.
It was so nice to see everyone and catch up!
Erin is 6 months pregnant and she's positively glowing!
Erin knitted her beautiful sweater
She loved the shag ombre pillows on one of our office sofas
And before I leave the subject, let me give you a quick update on Jillian. She had her liver transplant in January. Other than extreme tiredness, she's doing well on the health front. But money is a constant concern, as she's not yet allowed to work. If you can help, she would be tremendously grateful.
I don't talk about it a lot, but pressing is a critical part of my garment-making process. Proper pressing (or lack thereof) can make or break a project. (Note that ironing, a back-and-forth motion, is not the same as pressing, an up-and-down motion, generally applied with pressure.)
I have a large collection of pressing tools, but I wanted to highlight a few in this post. One of these days, I'll create a separate page dedicated to my many pressing tools. In my copious spare time. <ahem>
I learned about the Shoulder Stand from Ann Steeves, in one of her Pressinatrix posts. She learned about it from Pam Erny. The stand is sold by LH Designs, on Etsy. This is the only item sold by LH Designs and it's frequently out of stock, so I kept checking back from time to time. It took a few years, but I finally scored one in December.
It's very well made! I used it to press the curve on the bottom hem of my Palmer Pletsch jacket and it's a rock solid tool.
My friend Luanne Seymour, a very creative person on many fronts, used to teach classes on sewing bags and fabric collage at FabMo. I took two of her classes some years back and was enamored with her point presser.
I have a standard point presser—the kind that you see in most every sewing store. It's a good, basic tool and I use it all of the time. This one was smaller, featured inlaid wood, and was sanded to incredible softness. Luanne's husband, whose hobbies include custom cabinetry, made her beautiful point presser.
I asked if he'd be willing to make one for sale. He was busy at the time.
Last December, I was making a number of bags using silk tie remnants and it reminded me of the point presser. In January, I asked Luanne if her husband would be willing to make one for sale. This time he said yes!
I love my dainty point presser! Thanks, Steve!
I first blogged about my custom handmade sewing hams in 2011! (Wow, time flies.) Since that time, Stitch Nerd has been endorsed by Marcy Tilton, written up in Vogue Pattern Magazine, and has been mentioned by numerous bloggers.
I had in mind, for a long time, to order a larger "professional" sized ham. Last year, I did just that. I love my large ham! It molds to my bust darts better than my smaller hams.
I first blogged in November 2012 that you can download free, high quality catalogs from the Metropolitan Museum of Art, but this info is making the rounds again, so I thought I'd repost it.
Go to the Metropolitan Museum of Art's site to download some wonderful books, such as the book on Dior pictured above.
I'm sure that you know who Kenneth King is, right? I have two bits of news about Kenneth. First, he just published an Embellishment CD. Here's the table of contents:
It will be available any day now. If you order before March 10th, you get a $2 discount off the normal price of $24.95. I just ordered my copy. If you also want a copy, his website has his contact info.
Also, if you live in the San Francisco Bay Area, this March he is teaching a series of one-day workshops for PenWAG in San Jose. I can't attend, but they sound great!
I hesitated to mention that Marcy Tilton unveiled a new website over a week ago because, well... it's old news. Then I learned that other sewist friends of mine hadn't noticed.
How is this possible? Don't they check her site daily, like I do? :)
So, if you haven't seen it yet, be prepared for gorgeous, large photos and a slick, clean design. She's still hammering out some of the details. She welcomes feedback—you can email her directly, but she's also responding to comments on Stitcher's Guild.
I gave her some feedback that she's already addressed. I love the new site!
Here's a fun side note. Hugh Jackman made a visit to my SF office last Friday. He was there to promote his new movie, Eddie the Eagle. Our office overlooks the Bay Bridge. At the end of the event, Hugh was fascinated by the scintillating lights on the bridge.
Hugh Jackman
Here's the 25,000 LED light show that he was admiring! (It's now a permanent feature.)
I'm heading to the snow this week. A few weeks ago, it was 20°F in Whistler, Canada, and now it's 40°F. That's rather disappointing, but I'm still eager to see the snow!
While I'm in Whistler, some of you lucky folks will be attending Puyallup. I hope you have a great time! I look forward to seeing pics and updates on social media!
